INSTALLATION GUIDE
1
Ensure headlights are thoroughly cleaned
2
Use an alcohol wipe to degrease the surface area (included in the package).
3
Verify fitment before removing adhesive backing.
4
Install in a warm environment (more than 60 F).
5
Remove adhesive protectors in a dust-free environment.
6
Carefully place the guard on the headlight, applying small to medium force for 2 minutes at touchpoints. (Warning: adhesive is super strong)
7
Apply medium strength force to adhesive points on the part. (Warning: do not use excessive force)
8
You are ready to go.
